CAN Fiber Tranlater
友情提示:(1)有问题: 可以点击 右边中-在线咨询，左侧qq，旺旺在线联系
         (2)感兴趣: 可以点击 左侧中-分享到

Repeater

Converter from CAN ISO/IS 11898 to fiber optic cable

FO-Repeater

Converter from ISO 11898 to fiber optic cable


WEEE and RoHS conformThe FO Repeater is used for the conversion of the CAN-signal from copper wire (ISO 11898-2) to fiber optic cables. This provides a complete isolation and protection against EM-influences.

One special feature of the Repeater is that it separates a defective segment from the rest of the network so that the remaining network can continue working. After elimination of the defect, the segment is switched into the network again.

Technical Data

Display Sending (2 green LEDs), defective segment (2 red LEDs)
CAN bus interface ISO 11898-2. Screw terminals. CAN termination resistors are integrated (switchable).
FOC connection 2 x ST terminals for duplex line (Glass 50/125 µm duplex)
Baudrate Up to 888 kbps
Delay ~300 ns (translates into ~60 m (~90 ft.) bus length) between the wire connection of a FO Repeater through the fiber optic cable to the wire connection of a second FO Repeater (not including the signal delay time of the fiber optics, which is ~5 ns/m)
Power supply 9-35 V DC, 3 W typ., through terminals
Galvanic isolation 1 kV, 1 sec.; CAN 1
 
Certification CE
Temperature range -20 ºC to +60 ºC
Housing, size Plastic enclosure, 110 x 75 x 22 mm (without FO connector)

Contents of delivery
- FO-Repeater, Quick reference

from Stock

Order number
1.01.0063.01020 CAN Fiber Optic Repeater - Glass fiber version with ST connector